Digital night vision device NV-007SP LRF 850 nm

The Pard NV007SP-LRF digital attachment with a highly sensitive 2K CMOS sensor, long-range laser rangefinder (1097 m) and adjustable IR illumination of 850 nm is quickly and with minimal effort installed on your optical device and turns it into a highly accurate and reliable one. Mounted on daytime devices with parallax correction (AO/SF) and an eyepiece mounting diameter of up to 45 mm inclusive.

One of the lightest and most compact PNOs, which fits even in a jacket pocket and is suitable for both hunting and handheld night observations. The presence of WiFi and a recorder allows you to use the device as an autonomous compact video camera.

New matrix and new lens. To improve the clarity and detail of the image and increase the effectiveness of the action at night, in the new modification of this attachment, the 1920×1080 matrix was replaced with 2560×1440 and a lens with a lens diameter of 22.5 mm was installed. As a result, the most natural color image during the day and more graphic black and white in the dark, better drawing of small details and transmission of shades of black, plus smoother playback of dynamic scenes. Thanks to the replacement of the matrix, updated firmware and OLED display 1024x768, the image quality is preserved even at a maximum magnification of 14 times. And the focusing distance of 3 cm allows you to work with the attachment as with a digital magnifier and study objects at arm's length.

The 850 nm infrared illumination is activated in the "night" mode in conditions when the attachment's own resources are insufficient for normal target recognition.The hunter can adjust the brightness level and change the angle of divergence of the beam, and the beam itself is practically invisible to the animal's eye (but visible in night vision devices). The illuminator with VSEL laser consumes less energy, and works more stably and efficiently than previous Pard illumination options: the night observation range reaches 350 m.

Digital zoom 4...14x. You can adjust the screen position along the X/Y axes so that the center of the display always coincides with the center of the alignment mark. There is also a discrete digital zoom 1...3.5x, and PiP mode - for improved detail and precise adjustment to the place at any magnification.

8 hours of battery life without replacing the battery. 3 seconds of pressing the power button - and the attachment is ready for use: the indicator lights up and the Pard logo appears on the display. Power is supplied by 1 18650 rechargeable battery with flat contacts (included), you can also connect a Power Bank (USB-C). Due to the redesigned power consumption scheme and reduced charge consumption by built-in devices, the device provides about 8 hours of continuous operation. And thanks to changes in the design of the battery compartment, the cover is now attached to the body and will not get lost in the dark.

All-weather, shockproof and ultra-compact design.The device is designed for shock loads up to 6000 J (including .308 Win caliber), is maximally protected from dust, precipitation, internal fogging and accidental drops into water (IP67) and can be operated at temperatures of -25...+40 °C. Due to the vertical position of the battery compartment, the NV007SP-LRF rangefinder attachment is much more compact than its "predecessors" and takes up less space when installed on the ice, therefore, it minimizes the removal of the exit pupil. The rubber eyecup-corrugation on the eyepiece increases the safety of hitting, especially on equipment with strong recoil, and at the same time masks the glow of the screen when hunting at night. And the presence of a mini-Picatinny rail on the rangefinder module allows you to attach various accessories to the attachment, such as a tactical flashlight.

Quick and easy installation.The attachment is installed on the eyepiece of the device using a quick-release standard adapter ø45 mm. For precise installation and reliable fixation of the adapter on devices with a smaller eyepiece diameter, electrical tape and 3 insert rings of different thicknesses from the delivery set are used. The "assembly" process is quite simple. The adapter-adapter is inserted into the lens of the attachment and turned until it clicks, that is, until it is fully fixed, after which the attachment structure with the adapter is installed on the eyepiece of the device. The position of the device is centered and finally fixed with a quick-release clamp on top of the adapter. In the future, removing and installing the attachment will not take more than a few minutes, and will not require any tools or re-adjustment.