ASG Elite Force H8R 6 mm revolver replica

Elite Force H8r Gen 2 6 mm to ASG revolver powered by a CO ₂ capsule, equipped with two accessory rails, 2 magazines and fiber optic sights. 

Modern style

Elite Force H8R Gen 2 6 mm has a modern design inspired by contemporary revolver models . For the construction of the skeleton, drum and external barrel, a durable polymer was used, which was covered with white powder paint.

Elite Force H8R GEN 2 6 mm has been equipped with two accessory rails in the 22 mm Picatinne standard, allowing the installation of a laser target indicator, flashlight, as well as a collimator or optical sight.

The modern replica design emphasizes the high barrel profile with characteristic porting and anatomically profiled handle with a non -slip texture .

Mechanical sights are enriched with fiber optic, which facilitate and accelerate the ripping of the bow tie with Szczerbinka.

Blocked trigger mechanism

Elite Force H8R GEN 2 6 mm has the SA/DA trigger mechanism, allowing for precise shooting from the distracted tap (Single Action) or dynamically using self -control. In DA mode (Dobule Adction) the trigger road is longer and you have to put more strength to overcome it.

Manual stretching of the tap in Single Action mode, I mean that to break the trigger (firing shot) it occurs much faster and smoother.

Power supply 2

The revolver uses adjustable fuse (before the tap), which when enabled blocks the trigger mechanism and eliminates the possibility of firing an uncontrolled shot during transfer or as a result of falling.

Elite Force H8R Gen 2 6 mm is powered by carbon dioxide with a 12 g capsium CO _{2 . One cartridge allows about 60 shots to be fired with an even initial speed of about 100 m/s. The air temperature, the dynamics with which we shoot and proper maintenance of the valves are the most influenced by the shot performance. It should also be remembered that the CO 2 (pierced) capsule can leave a maximum of 48 hours in the replica. After this time, the capsule should be removed or "fired".}

The assembly and replacement of the capsule are very simple , they only require a photo of the cladding, placing the capsule in the handle and tightening it with a pressure screw. This process is much easier for an Allen fixed permanently to the cladding .

This simple solution means that the key is all the time at hand , thanks to which we will avoid a troublesome situation in which we cannot replace the capsule due to a lack of tool.

The role of magazine is played by polymer inserts with a capacity of 10 balls (2 magazines included). Place the loaded inserts in the range in front of the drum.