Fenix HT18R LED flashlight set and ALG-18 tactical assembly and a Fenix Aer-05 gel cable switch

Review (0)
Available:
In Stock
499 zł
Quantity:
SKU: 039-628
Manufacturer: Fenix

LED flashlight Fenix HT18R and tactical assembly Alg-18 and switch on the Fenix Aer-05 gel cable

The tactical flashlight Fenix HT18R is characterized by an impressive power of 2800 lumens and the effective range of lighting of objects distant even more than 1100 m.

Features of the LED Fenix HT18R:
  • Light stream with a power of 2800 lumens
  • Efficient Luminus SFT70 diode with increased lighting density of the light stream
  • Operation with one hand using two rear buttons
  • Light rescue mode S.O.S.
  • In the form of power supply in the form of the Arb-L21-5000 v2.0

tubus of the flashlight is made of anodized aluminum a6061-T HA-III battery, which guarantees high strength damage and solidity of the structure. Thanks to the transverse milestick of the surface, the flashlight probably lies in the hand, and its grip is well noticeable - even in gloves. The optical system is protected by a steel crown, which allows you to safely place the flashlight flat. Despite the wide, 68 mm head, the star is handy and comfortable to use. 188 mm long flashlight, with a 21700 battery with a capacity of 5000 mAh , weighs only 362 g, which is a relatively small mass for an article with such impressive capabilities. The battery compartment uses two springs that guarantee reliability and stability of work during hunting or use in difficult conditions

Fenix ALG-18 tactical assembly features:
  • Universality: intended for fixing a flashlight on a long weapon, such as a carabiner or a shotgun that does not have an accessory rail. Damage.
  • Abrasion resistance: assembly has been subjected to the HA-III hard anodizing process, which increases abrasion resistance and scratches, guaranteeing the longevity of use.
  • Easy installation: does not require additional assembly tools-just block the flashlight in the cover and attach the module for the barrel of the weapon. Fenix Aer-05 gel switch:
    • adapted to the Fenix TK16 V2.0: Aer-05 flashlight was specially designed for cooperation with the Fenix TK16 V2.0 flashlight, providing convenient and precise operation. Turbo and Strobo modes) and a round tactical switch with a click, enabling constant lighting.
    • High service life: switches have a life of up to 100,000 use and provide 3 A current, which allows long -term action without loss of efficiency.

    Fenix HT18R km

    The light source is the new generation Luminus SFT70 diode, generating the maximum light stream of 2800 lumens. Emitted has a cool-white color of 6500 K, which works great in large-range flashlights. The human eye receives "cold light" as stronger, which is why it works best for illuminating the area and distant objects. The possibilities of flashlight significant are increased by the colorful filters applied to the head .

    The red filter works great in night activities, because unlike white light, the red stream does not blind the user, provides smooth adaptation of sight in the dark, facilitates the reading of maps and makes us less visible to animals and other people. The green filter is a proven solution for hunters , because most animals do not respond to green light, which facilitates the approach and firing accurate shot.

    The flashlight uses anti -reflective glass with high light transmission and a smooth SMO reflector. This design perfectly concentrates light stream, which translates into an impressive range of up to 1100 m. Thanks to this Fenix HT18R flashlight easily illuminates the forest wall, mountain slope, gorge and other distant places that we want to see.

    Fenix - hunting hunting flashlights

    The user has at his disposal 4 levels of brightness permanent light: turbo, high, medium, low and 2 flash modes : Strobo and S.O.s. Fenix HT18R has a convenient interface, operated with one hand using 2 rear buttons.

    The large, round tactical button is used to turn on and off the light and activate temporary light. A smaller button with an oval profile is responsible for changing the levels of the brightness of the modes and activates the 2 mentioned flash modes. Thanks to the memory function, after another activation of the flashlight, the recently used light mode is automatically selected (excluding strobe and s.o.s.). Such functionality makes the HT18R flashlight to be simple and extremely comfortable , thanks to which it works great in hunting, the work of uniformed services and exploration.

    Fenix HT18R-a long-range flashlight with a power of 2800 lumens

    The flashlight is powered by the Arb-L21-5000 V2.0 21700 battery with a capacity of up to 5000 mAh! V2.0 The battery used has twice the capacity than the 18650 standard cell, affecting performance and long working time. In a maximum mode of 2800 lumens, the flashlight works up to 100 minutes (total working time). The functionality and mobility of the flashlight significantly increases the built-in USB-C charging port, which allows you to quickly charge the battery without having to remove it from the flashlight , e.g. with a power-bank or other standard power sources. Access to the charging socket is obtained after removing the rubber cover, which effectively protects the port against moisture, dust and dirt. Thanks to the battery level indicator function (diode in the body) and a low -voltage warning, we can conveniently control the state of energy in the flashlight after turning on the flashlight, the indicator for 3 seconds informs us about the level of battery charge.

    indications of the battery level:

    • Permanent green light: 100-85%,
    • flashing green light: 85-50%,
    • Permanent red light: 50-25%,
    • flashing red light: 25-1%. The last level of brightness used. After turning on again, the flashlight automatically activates in this mode (memory function).  The flashlight has a high class protection class IP68 , so it is resistant to dust, dust, full of water immersion at a depth of 2 m and a fall from a height of 1 m. The manufacturer has not forgotten about the use of protection against overheating and inverted polarization and a controller with digital current regulation.

      Light parameters were tested using ARB-L21-5000 V2.0 batteries.

      diode mode max. Light stream [LM] max. Working time 21700 [h min] range [m] max. Light [CD]
      white turbo 2800 1 h 40 min 1100 300,000
      high 1000 2 h 15 min 670 113 113 000
      medium 350 6 h 30 min 400 40,000
      low 30 42 H 100 3,000
      strobo 2600 - - -
      s.o.s. 150 40 h 200 10 000

      Tactical assembly of the Fenix ALG-18 flashlight available in the Kolba hunting store

      Fenix alga accessory .

      Installation was performed from aluminum A6061-T6 and has been subjected to the process of hard ha-III. This guarantees increased resistance to wiping and scratches. Fenix ALG-18 assembly allows the flashlight on a rifle or shotgun without a proper rail. For installation installation, we do not need any tools, just put and block the flashlight in the cover and attach the complete module to the weapon barrel. Rubber inserts In the clamps, metal surfaces protect against scratches and prevent mounting/ flashlight from moving under the influence of recoil. Installation has a large adjustment range thanks to this can be fastened on a weapon with a barrel with an outer diameter of 18-23 mm . Flamers with a body diameter of 23.5-28 mm with a head less than 70 mm.

      A convenient tactical switch for Fenix flashlight facilitates the operation

      fenix Aer-05 is a remote gel switch dedicated to the Fenix TK16 V2.0 flashlight. The switch provides precise operation and quick installation on weapons using Velcro tape or clamping bands.

      Aer-05 has been equipped with two buttons, i.e. silent pressure switch (without a few clicks) with high sensitivity for activation of turbo light and strobo and a round tactical switch (with a click) used to initiate continuous lighting .

      The life of the buttons is 100,000 use and are able to send 3 and for a long time. Thanks to the suggestions of users in the second generation of switches, a simple cable with an optimal length of 23 cm from flexible PU.

      was used

      Adapter tightened to flashlights (TR22.4 × 1.5 mm thread) is made of aluminum T6. Metal has been tested hard ha-III , which guarantees very high resistance to abrasion and scratches. The Aer-05 design has an IP68 protection class, thanks to which the switch is resistant to dust, small solids and complete immersion in water 2 m deep for 30 minutes. AER-05 was designed for flashlights powered by a 2100 cell, with APF control system. The switch can be attached to the weapon in two ways, i.e.

      • With the help of Velcro (included) - which allows you to quickly put on and detach the switch
      • using 4 clamps - with a view to long and regular use.

Comments
Manufacturer Fenix
Manufacturer code 68809
Manufacturer Logo Fenix
SKU 039-628
Copyright MAXXmarketing GmbH
JoomShopping Download & Support