Installation for Picatinny Leapers Utg RMR 45 degrees

Offset assembly Leapers Utg for mounting the collimator in the RMR standard at an angle of 45 ° relative to the sight telescope, which allows you to quickly change the sight device and equally quickly track down the target.

Light assembly of Leapers Utg was created from anodized aluminum 6061-t6 processed CNC.

The construction is adapted for fastening on the Picatinny Standard and is fastened with a single screw.

Note: Use only attached screws No. 6-48 For optics assembly. The manufacturer recommends tightening the screws with a dynamometric wrench with a set of about 12 inch-LB and 35-inch sidebrow screw.

Features of offset mounting Leapers UTG RMR 45 °:

• Compatibility: OP3 Micro, OP3 Micro SLS, Trijicon® RMR®, RMR® Footprint;
• Light and durable construction made of milled CNC and black aluminum aluminum 6061-t6;
• adapted for mounting on the rail Picatinny;
• angle of inclination 45 °;
• Weight: 39 g;
• Included: Torx T10 and T20 key and screws No. 6-48 TORX T10 X3 and No. 8-32 TORX T20 flat.