Fenix WF30re LED flashlight

Fenix WF30re to Professional sparkling flashlight with a stream of light of 280 lumens, with a safe charging system, having IECEX, ATEX and SGS certificates , allowing it in the most dangerous zones and high -exposed zones and dusting.

Armored construction

Tubus of the flashlight is made of tempered aluminum A6061-T6 with a hard anodized HAIII coating, which guarantees resistance to damage and oxidation. The endurance and reliability of the flashlight confirms the fall (resistance to falling from a height of 1.5 m) and crash, in which the body was impact with a steel ball with a weight of 1 kg from a height of 70 cm. Unlike traditional tactical flashlights and EDC, the nut is blocked with 8 mm screw. Such strengthening of the structure prevents accidental starting of the flashlight during a fall or impact. The flashlight has a high class of tightness IP66/IP68, so it is resistant to full immersion of water at a depth of 2 m and a fall from a height of 1 m.

The optimal range and width of light

The light source is the popular Cree XP-G2 diode emitting a neutral color beam, which even with long use does not tire your sight, and the illuminated items faithfully reflect their colors and details. The flashlight uses a tempered glass with high light transmission and the Orange Peel reflector, which causes the light stream to be evenly dispersed and effectively illuminates objects even 170 m away. The maximum flashlight stream is 280 lumenó w, optimal for action over a short distance, and illuminating distant areas.

Operating modes

The user has at his disposal 3 modes of solid light: high, medium, low and one flash: strobo. To operate the flashlight, one side button (made of metal) for activation and changing light modes is used. The convenient location of the switch and a clear interface ensure comfortable and friendly use of the flashlight. The WF30re flashlight also uses a battery level indicator (LED in the side switch), protection against overheating and inverted polarization, and a low battery warning function.

Battery level indications:

• Permanent green light: 100-85%,
• flashing green light: 85-50%,
• Permanent red light: 50-25%,
• flashing red light: 25-1%. The flashlight power supply was used a special lithium-ion battery Fenix ARB-L21-2600EX , which meets strict safety tests (including anti-balance tests) and is resistant to high and low temperatures from -35 ° C to 45 ° C. The capacity of 2600 mAh provides up to 120 hours of operation in low mode - 30 lumens. For charging the flashlight, the Iskor -secure DC interface was used with a circuit protection, protecting the system against variable current threats. Full charge Fenix WF30re takes 5 hours and 30 minutes. Test results obtained by Fenix in laboratory conditions.

  Safety certificates

  Fenix WF30RE has passed stringent tests and has IECEX, ATEX and SGS certificates , which allow a device to work in particularly dangerous environments, i.e.:

  • zone 1 - a space in which an explosive atmosphere consisting of a mixture of air and flammable substances in the form of gases, fogs, couples can sometimes arise during normal use.
  • zone 2 - a space in which the explosive atmosphere consisting of a mixture of air and flashed in the form of gas, It does not occur during normal use, but there is a risk of its appearance and short occurrence
  • zone 21 - a space in which the explosive atmosphere consists of a cloud of flammable dust in the air, it can sporadically occur during normal use
  • zone 22 - space in which the explosive atmosphere consists of dust cloud flammable in the air, does not occur during normal use, but there is a risk of its appearance and short occurrence.

  Certificates:

  • IECEX: IECEX Tur 18.0042X
  • Ex ib iic t4 gb
  • ex ib iiic T130 ° C db
  • ATEX: TÜV 18 ATEX 8252x
  • ii 2G 2G Ex ib iic t4 gb
  • ii 2 T130 ° C DB
  • SGS: SGSNA/21/SUW00099X
  • ex ib iIC T4 GB; Ex ib iiic t130ºC db
  • class I, Zone 1, AEX IB IIC T4 GB; Zone 21, AEX IB IIIc T130ºC DB
  • Nepsi: GYB20.1823X
  • ex ib iIC T4 GB
  • ex ibd 21 T130

  meets the standards:

  • IEC 60079-0: 2017,
  • IEC 60079-11: 2011,
  • EN 60079-0: 2018,
  • EN 60079-11: 2012,
  • GB 3836.1-2010,
  • 3836.4-2010,
  • GB 12476.1-2013,
  • GB 12476.4-2010,
  • can/CSA-C22.2 No. 60079-0: 19,
  • can/CSA-C22.2 No. 60079-11: 14,
  • CSA C22.2 NO.250.4-14,
  • ANSI/UL 60079-0-6 Edition,
  • ANSI/UL 60079-11-6 Edition,
  • UL153- 13 Edition,

  The use of the flashlight:

  • Fire brigade,
  • Fire protection,
  • Oil industry,
  • chemical and textile industry,
  • Metallurgia,
  • Elektrówna,
  • Paper production plant etc.

  diode	mode 214px "> max. Light stream [LM]	max. Working time [h min]	Maximum range [m]	max. Light [CD]
  		high	280	6 h 50 min	170	7200
  average	3589
  low	30	120 H	58	830
  280	-	-	-

  The parameters presented were obtained in laboratory conditions. During the tests, the Fenix ARB-L21-2600EX battery was used.